Comtech EF Data SDM-650B - Manual (Page 225)

SDM-650B Satellite Modem Remote Control Operation
Rev. 6 B–49
B.2.5.15 Overhead Channels Parity
Command: <add/OCP_xxxx”cr”
Response: >add/OCP_xxxx”cr””lf”]
Status Only: <add/OCP_”cr”
Response:
>add/OCP_xxxx”cr””lf”]
Where: xxxx = ODD, EVEN, or NONE.
B.2.5.16 Interface Substitution Pattern (Transmit 2047 Pattern)
Command: <add/ISP_xxx”cr”
Response: >add/ISP_xxx”cr””lf”]
Status Only: <add/ISP_”cr”
Response:
>add/ISP_xxx”cr””lf”]
Where: xxx = ON or OFF (transmit 2047 pattern generation).
B.2.6 System Commands/Responses
B.2.6.1 Time of Day
Command: <add/TIME_hh:mmxx”cr”
Response: >add/TIME_hh:mmxx”cr””lf”]
Status Only: <add/TIME_”cr”
Response:
>add/TIME_hh:mmxx”cr””lf”]
Where:
hh = hours.
mm = minutes.
xx = AM or PM.
Example: Set modem 67 time to 10:45 PM.
Command: <67/TIME_10:45PM”cr”
Response: >67/TIME_10:45PM”cr””lf”]