Cybex 55620H Modular - Manual (Page 163)

MODULAR CHEST PRESS
5640
ASSEMBLY & PARTS
Assembly Notes
1. Keep all shipping packages near area of installation.
Standard shipping items include:
• Chest Press Column Assembly - 5640-9x
• Chest Press Seat Package - 5640-50
• Chest Press Arm Package 5640-51
• Chest Press Cushion Box Assembly 4015A083-0
• Top Weight Package (20-4 x 12, black) - 4700-010
• Weight Pack 1 (4 x 12, black) - 4700S040
• Weight Pack 2 (4 x 12, black) - 4700S043
NOTE: x denotes specific color
2. Follow steps 1 - 6 of the assembly guidelines listed
on the 5600 Modular Center Post or steps 1 -4 listed
on the 5629 Tandem Center Post Assembly & Parts
instruction sheet.
3. Measure distance from edge of back cushion
to one end of arm. Repeat for other side. See
Figure 1.
4. Adjust position of input arm assembly until the
two measurements are as equal as possible.
5. Install cable end as shown in the Cable Routing
diagram using washer (item #19), hex nut
(item #23 and jam nut (item #24).
6. Install pulley mount (item #53) and adjusting
tube (items #3 and #4).
7. Complete cable routing and then refer to step 8
in the Modular Center Post Assembly & Parts
or step 6 in the Tandem Center Post Assembly
& Parts instruction sheets.
NOTE: This machine shipped with an
Owner’s Manual. Additional copies can be
obtained by contacting your dealer or a
Cybex Representative at 1-888-462-9239.