Cybex 55620H Modular - Manual (Page 70)

Figure 12
C. Locate two BHSCS .50-13 x 1.25 (#37), two split lockwashers (#57), two hex nuts .50-13
(#13) and two hole plugs (#77). For the Free Standing configuration, also locate (from step 4B)
one SHCS .50-13 x 3.25 (#82D), one split lockwasher .50 (#82E) and one hex nut .50-13
(#82B).
D. Install the Leg Press Assembly to the column. See Figure 12 for Modular/Tandem
configurations and Figures 13A and 13B for Free Standing configuration.
E. Install hole plugs (#77) to the Leg Press Assembly (Modular/Tandem configurations only). See
Figure 12.
Figure 13A Figure 13B
82D
82E
82B
77
77
57
57
13
37
37
57
57
13
37
37
Cybex Modular Owner’s Manual
Page 4-16