Cybex 55620H Modular - Manual (Page 85)

Cybex Modular Owner’s Manual
Page 4-31
Modular Leg Extension/Leg Curl
5653 Modular/Tandem Configuration
5307 Free Standing Configuration
TOOLS REQUIRED
• 5/32” Allen wrench
• 7/32” Allen wrench
• 5/16” Allen wrench
• 3/8” Allen wrench • 9/16” Socket/wrench
• 3/4” Socket/wrench
• Rubber mallet
• Step ladder
NOTE: A minimum of two people will be required to assemble the Leg Extension/Leg Curl.
1. Read and understand all instructions thoroughly before assembling the Leg Extension/Leg
Curl (LE/LC) (see steps A - C).
A. Locate the Modular Assembly & Service manual that you received with your order. If you did
not receive a manual contact Cybex Customer Service and ask for part number 55620.
B. If you are assembling the Leg Extension/Leg Curl station into a Tandem configuration, locate
and review the Tandem Center Post instructions contained with the Tandem configuration (this
sheet is also located in the Modular Assembly & Service manual). Skip step 1 in the Tandem
Center Post instructions.
C. If you are assembling the Leg Extension/Leg Curl station into a Modular configuration, locate
and review the Modular Center Post instructions contained with the Modular configuration.
Skip step 1 in the Modular Center Post instructions.
2. Verify you have received the appropriate configuration (see steps 2A - 2C, Figures 1 and 2).
• Hammer
• Utility knife
• Automotive engine oil
Assembly Instructions
Unpacking
A. If you ordered the Modular/Tandem
configuration (5653):
Shipping Package Part Number
• LE/LC Column 5653-9x
• LE/LC Package 5653-50
• Weight Package 4700S040
• Weight Package 4700S043
• Top Weight Package 4700-010
• Cushion Set 8640-011
B. If you ordered the Free Standing
configuration (5307):
Shipping Package Part Number
• LE/LC Column 5307-9x
• LE/LC Package 5653-50
• LE/LC Stabilizer 5302-51
• Weight Package 4700S040
• Weight Package 4700S043
• Top Weight Package 4700-010
• Cushion Set 8640-011