Daktronics All Sport 1600 Series - Manual (Page 30)

22 Segment Timer
5.3 Segment Timer Keys
First/Last Segment
Display Action
NN = current first segment
XX = current last segment
Press the <FIRST/LAST SEG> key. This setting determines
the first and last segment in a range of segments to run when
<START> is pressed.
Enter the First Segment value and press <ENTER*/EDIT>.
Enter the Last Segment and press <ENTER*/EDIT> to exit.
The console will be reset to the segment saved as First
Segment when the <RESET TO 1ST SEG> key is pressed.
The console automatically resets to the segment saved as
First Segment after the segment saved as Last Segment is
completed.
Segment Number/Time
Display Action
XX = segment number
XX = segment number
MM:SS = minutes, seconds
Press <SEG. NO.  TIME > to set individual segment times.
Enter the segment to be edited using the <0> through <9>
keys and press <ENTER*/EDIT>.
Enter the time for the segment and press <ENTER*/EDIT> to
accept the time and move to the next segment time.
Press <ENTER*/EDIT> again to exit the function.
Interval Time
The interval time is the time between each segment.
Display Action
MM:SS = minutes, seconds
Press <INTERVAL TIME > to display the current value of
interval time on the bottom line of the LCD. Edit the value of
the interval time and press <ENTER*/EDIT>.
If the interval time is set to 00:00, no interval time will be
counted.
FI RST SEG NN
LAST SEG XX
SEGMENT: XX *
TI ME EDI T
SEGMENT: XX
TI ME EDI T MM:SS*
I NTERVAL TI ME
MM:SS*