Daktronics All Sport 1600 Series - Manual (Page 36)

28 Shot/Play Clock & Pitch Timer Operation
Timer Reset 1
Press <TIMER RESET 1> to reset the timer to the Reset 1 time and to show the Reset 1 time
value on the display.
Timer Reset 2
Press <TIMER RESET 2> to reset the timer to the Reset 2 time and to show the Reset 2 time
value on the display.
Recall Shot Time (Shot Clock Mode Only)
Display Action
Press <RECALL SHOT TIME> followed by <1> to undo an
inadvertent shot clock reset. This will change the clock to the
value it would display if the previous reset was not executed.
Refer to Section ‎2.6 for information on using remote start/stop switches for shot/play clock
and pitch timer functions.
RECALL SHOT CLK?
1-YES 2-NO