Daktronics All Sport 1600 Series - Manual (Page 32)

24 Segment Timer
Display Action
* = current setting
The console will prompt for the auto stop at last segment
setting.
Press <1> to set the console to stop when the last segment
has been completed.
Press <2> to set the console to start over at the first segment
when the last segment is completed
Warning Time
Display Action
MM:SS = minutes, seconds
Press <WARNING TIME >, enter the time in minutes and
seconds and press <ENTER*/EDIT>.
Enter 00:00 for no warning time (default).
When the warning time is reached, the segment number
flashes until the main clock reaches zero.
Current Segment +1
Press <CURRENT SEGMENT +1> to increment the segment number.
Reset Current Segment
Press <RESET CURRENT SEG> to reset the segment time to the value specified by the
current segment. The segment number will remain at the current value.
Edit Current Segment
Display Action
NN = current setting
Press <ENTER*/EDIT> then <CURRENT SEGMENT + 1> to
display the current segment for editing.
Enter the new value for the current segment number and press
<ENTER*/EDIT>.
Reset to First Segment
Press <RESET TO 1ST SEG> to reset the segment number and segment time to the values
saved as the first segment.
Note: The Reset to First Segment function is disabled while the clock is running.
STOP AT LAST SEG
1*YES 2-NO
WARNI NG TI ME
MM:SS*
CURRENT SEGMENT:
EDI T NN*