Daktronics All Sport 1600 Series - Manual (Page 31)

Segment Timer 23
Display Interval
This setting determines whether the interval count will be displayed on the scoreboard.
Display Action
* = current setting Press <1> to display the interval time on the scoreboard.
Press <2> to disable interval time display. The interval time will
be displayed only on the console.
Note 1: Regardless of this setting, the value saved in
interval time will be counted down between segments.
Set the interval time to zero if no interval between
segments is desired.
Note 2: When the interval time is being displayed, the
segment number on the scoreboard flashes to indicate
that the time displayed is interval time.
Copy Range
This key sets a range of segments to a specific value.
Display Action
MM:SS = minutes, seconds
XX = starting segment value
YY = ending segment value
Press <COPY RANGE > and enter the time desired.
Press <ENTER*/EDIT> to move to the next field. Enter the first
and last segments that will have this time. When the last
segment in the copy range is set, the menu will be exited.
Once completed, all segments from xx to yy (inclusive) will be
set to the specified value.
Auto Stop
This key is the auto stop function of the console.
Note: To set the console to stop after the last segment in the series is completed, the auto
stop at each segment setting must be set to NO.
Display Action
* = current setting Press <AUTO STOP> to enter this menu.
Press <1> to set the console to stop after each segment is
completed and wait for the <START> key to proceed with the
next segment.
Press <2> to set the console to automatically begin the next
segment when each segment is completed.
DI SPLAY I NTERVAL
1-YES 2*NO
COPY: MM:SS *
SEG XX TO YY
STOP AT EACH SEG
1-YES 2*NO