Flowserve Limitorque Master Station III - Manual (Page 57)

57
Limitorque Master Station III FCD LMENIM5001-02 – 12/13
flowserve.com
Figure 8.34 - Polling Priority-Active MOVs
In order to optimize the network efficiency, lower priority MOVs can be set to be polled at a user
defined cycle.
8.2.7 File Manager
The File Manager screen (Figure 8.35) allows the user to import/load/export the Master Station
configuration file, export the event log, and import the MOV tag name files. In addition, the user
can update the unit’s software version via this menu and restore the configuration settings back to
factory default. These actions in detail consist of:
Import Config File: enables the user to import an existing system configuration file from a connected
USB Flash Drive.
Import Tag File: enables the user to import a spreadsheet to the Master Station’s tag configuration
settings.
Load Config File: enables the user to import a saved system configuration file from system memory.
Export Config File: enables the user to save the configuration file to a connected USB Flash Drive.
Export Event Log: enables the user to save the Master Station event log to a connected USB Flash Drive.
Update Software: enables the user to update the system software though a connected USB Flash Drive
with a software update file.
Restore Factory Defaults: enables the user to revert all system changes back to the original factory
settings the Master Station was shipped with.