Flowserve Limitorque Master Station III - Manual (Page 68)

Limitorque Master Station III FCD LMENIM5001-02 – 12/13
68
Figure 10.3 - Removing Main AC Input Power Module
Locate the AC surge protector, unplug wiring connector on both sides of the protector, and remove it
from the cable assembly.
Figure 10.4 - AC Surge Protector
Install replacement protector by following above procedures in reverse order.
10.6.2 AC Fuse Protection
Release clip on bottom of the fuse holder and gently remove holder from main AC power input
module.
Figure 10.5 - Removing Fuse Holder