Flowserve DDC-100 Master Station II - Manual (Page 25)

FCD LMAIM5001-00 DDC-100 Master Station II Installation and Operation Manual 25
Flow Control Division
Limitorque Actuation Systems
8. Tag names are limited to 8 characters. Spaces and other symbols are considered a character.
9. Save the file in .CSV (comma separated value) format.
10. Using FTP, copy the TAGNAME file to the Active Master Station.
11. Power cycle the Master Station to load the new TAGNAME file. On power-up the new tag names will
appear on the ACTIVE Master Station.
12. For a Hot Standby Master Station, after the Active unit has been power cycled, enter the
configuration screens and save the current configuration. This will transfer the new TAGNAME file to
the Standby Master Station.