Flowserve DDC-100 Master Station II - Manual (Page 37)

FCD LMAIM5001-00 DDC-100 Master Station II Installation and Operation Manual 37
Flow Control Division
Limitorque Actuation Systems
Name MX-DDC UEC-3-DDC
Digital Output
Bit 00 Close Contactor Close Contactor
01 Open Contactor Open Contactor
02 AS-1 User (K3)
03 AS-2 SW-93 LED
04 AS-3 SW-93 LED
05 AS04 User (K6)
06 AR-1, Opt N/A
07 AR-2, Opt N/A
08 AR-3, Opt Bits 08-15
09 Network Relay Field Unit Software
10 - 15 Not Used Version ID
Digital Inputs 1
Bit 00 Remote Mode Selected Remote Mode Selected
01 Thermal Overload Fault Thermal Overload Fault
02 Open Torque Switch Open Torque Switch
03 Open Limit Switch Open Limit Switch
04 Close Torque Switch Close Torque Switch
05 Close Limit Switch Close Limit Switch
06 Not Used Aux. Open Input
07 Not Used Aux. Close Input
08 User 0, Terminal-21 User 0, TB2-1
09 User 1, Terminal-10 User 1, TB2-2
10 User 2, Terminal-9 User 2, TB2-3
11 User 3, Terminal-6 User 3, TB2-4
12 User 4, Terminal-7 User 4, TB2-5
13 User 5, Terminal-5 User 5, TB2-6
14 User 6, Opt, Terminal-23 User 6, I/O Module Only
15 User 7, Opt, Terminal-24 User 7, I/O Module Only
Digital Inputs 2
Bit 00 Not Used Analog in 1 Lost
01 Not Used Analog in 2 Lost
02 Analog in 1 Lost Analog in 3 Lost
03 Analog in 2 Lost Analog in 4 Lost
04 Network A/B Lost Network A/B Lost
05 Not Used Reserved
06 DDC Bd. Present Reserved
07 I/O Opt Board Present Reserved
08 Not Used Reserved
09 Not Used Reserved
10 Not Used Reserved
11 Not Used Reserved
12 Phase Lost Phase Lost
13 Phase Reverse Phase Reverse
14 User 8, Opt, Terminal-25 User 8, I/O Module Only
15 Not Used User 9, I/O Module Only