GAI-Tronics Elemec3 Portal User Manual - Version 1.2 - Manual (Page 14)

Pub. 42004-485A
Elemec3 Portal User Manual Version 1.2 Page 12 of 35
f:\standard ioms - current release\42004 instr. manuals\42004-485a.docx
02/14
Tick Tones Button
Click the T ICK T ONES button to display the Send Tick Tone window shown below.
Figure 14. Tick Tones button
The Send Tick Tones window allows you to play the Tick Tone to the selected zone and is generally used
for testing the speakers.
N
OTE : The Tick Tone is specified using the Elemec3 Console application.
Figure 15. Send Tick Tones screen
Select the zone, using the Zones drop down list.
Figure 16. Send Tick Tones Drop Down List
Clicking the green triangular ‘Play’ button broadcasts the Tick Tone to the selected zone.
Figure 17. Send Tick Tones – Play and Stop Buttons
Tick Tone Status – the zone is shown in red when the Tick Tone is being broadcast.