GAI-Tronics Elemec3 Portal User Manual - Version 1.2 - Manual (Page 6)

Pub. 42004-485A
Elemec3 Portal User Manual Version 1.2 Page 4 of 35
f:\standard ioms - current release\42004 instr. manuals\42004-485a.docx
02/14
Host Computer IP Address
By default, the E3 Controller IP address is factory set to the static IP address 192.168.1.25 with a subnet
mask of 255.255.255.0. If A/B redundant controllers are being used in the system, the “A” Controller
will have the default IP address of 192.168.1.25. The “B” Controller will have the default IP address of
192.168.1.26.
Depending on the network configuration, either static IP or DHCP can be used. If a DNS server is
available, connection can be made using the Elemec3 host name.
Consult with your network administrator for proper configuration of the host computer and Elemec3
system(s).
Running the Portal Application
The Administration Utility Welcome screen shown in Figure 4 appears momentarily as the program is
starting.
Figure 4. Administration Utility Welcome screen