Fault reporting configuration in elemec3 – GAI-Tronics Elemec3 Portal User Manual - Version 1.2 User Manual
Page 32
Advertising
Pub. 42004-485A
Elemec3 Portal User Manual Version 1.2
Page 30 of 35
f:\standard ioms - current release\42004 instr. manuals\42004-485a.docx
02/14
Fault Reporting Configuration in Elemec3
Shown below are the different Fault Categories and types as defined in the Elemec3 Console
application:
System Fault
Access Panel Fault
I/O Card Fault
Amplifier Fault
Software Fault
External Fault
The Fault Reporting Configuration screen shown in Figure 45 is from the Elemec3 Console and displays
the possible Fault Categories: N
OTE
: This screen is not available through the Elemec3 Portal
application.
Figure 45. Fault Reporting Configuration screen (from Elemec3 Console software)
Advertising