GAI-Tronics ICP9000 Navigator Series Console Operator's Manual - Manual (Page 10)

Foreword ICP9000 Navigator Series Console Operator’s Manual
12/10 10
The following field installation kits and accessories are available for installation in the ICP9000
Navigator Series Console:
Kit Description
XCP0010A DC Control Kit (one per dc channel)
XCP0030A 25-Pair Telco Interface Kit
XCP0040A 4-Channel E&M Signaling Kit (requires CP0050 or XCP0050A)
XCP0050A Supervisory Control Kit
XCP0060A External Enhanced Phone Interface Kit
XCP0070A Direct Enhanced Phone Interface Kit
XCP0080A Battery Revert Power Supply Kit
XCP0130A Logging Recorder Output Module
XCP0100A 4-Channel Expansion Kit
XCP0140A Headset Box
XCP0150A 25-foot cable, 25-pair with connector
XCP0160A 50-foot cable, 25-pair with connector
XHS003C Amplified Headset (requires XCC003B)
XCC003C Coiled Cord with PTT (requires XCP0140A or XAAB002A)
XDM003A Desk Mic (requires XAAB002A for remote MCU installations)
XCP0600A Output Control Module Kit, 32 outputs
XRM0001A Control Module Relay Kit, 8 Form “C”, 10 A
XFS002A Dual Footswitch
XAAB002A Audio Accessory Box with Telephone Interface
TDN9413A MDC1200 STAT-ALERT Signaling Kit (Logging Recorder Output Module requires
removal prior to installation)
The following programming software and cable are required for programming the ICP9000 Series
Navigator Console (PC and MCU).
Model Description
XAC4000A Programming Bundle CD; Includes CARD Suite Software (included with console
purchase)
XAC2000A Graphical User Interface (GUI) Software (included with MCU)
XCP0170A Programming Cable (PC to MCU)