GAI-Tronics ICP9000 Navigator Series Console Operator's Manual - Manual (Page 46)

Standard Feature Operation ICP9000 Navigator Series Console Operator’s Manual
12/10 46
Multi-Select Alert
After the multi-select has been selected, it is possible to generate an attention-getting alert tone to all the
selected channels by pressing the desired alert tone button. When the operator presses the alert tone
button, the alert tone is generated as described previously. When the alert tone is complete, the operator
can use the
TRANSMIT button to transmit to all selected channels.
Operations of Channel Transmit during Multi-Select Mode
One restriction applies to the use of the channel TRANSMIT button, as well as many of the programmable
button functions, while in multi-select mode. While selecting the multi-select, indicated by the flashing
multi-select indicator, the use of the channel
TRANSMIT button is prohibited. This is necessary since the
selection of a multi-select uses previously configured channel settings that may include different
frequency and secure mode settings. If the channel
TRANSMIT button were used in multi-select edit
mode, the operator may intend to transmit on one channel/frequency while they may, in fact, transmit on
a different frequency than desired. After the first multi-select transmit, however, the channel
TRANSMIT
buttons can be used.