GAI-Tronics ICP9000 Navigator Series Console Operator's Manual - Manual (Page 57)

ICP9000 Navigator Series Console Operator’s Manual Options
57 12/10
Output Control XCP0600A
The Control Option allows you control up to 32 outputs. When the output is active, the button will turn
orange. When the output is inactive, the button will return to its original color. Programming of the
buttons and their labeling is accomplished through the control setup menu.
The Control window can be expanded/reduced to show additional buttons by clicking on the right margin
and dragging to the right/left. Selecting a Control button will cause the button’s border to light. If the
button is programmed for momentary operation, the border will extinguish upon release of the button. If
the button is programmed for push-on/push-off operation, the border will remain lit until the button is
pressed a second time. If the button is programmed for timed operation, the button will release and the
border will extinguish when the programmed time-out duration has been reached.
Figure 23.