GAI-Tronics ICP9000 Navigator Series Console Operator's Manual - Manual (Page 25)

ICP9000 Navigator Series Console Operator’s Manual Navigator Configuration
25 12/10
Tools - Options - Save Profile
Saves settings to the current user logged on. The shortcut key combination is <Ctrl+S>.
Tools - Reset Console
This reboots the console’s MCU.
Logon
The Operator Log On box allows the user to login to Navigator. If a profile had been saved for that user,
the settings are applied.
Figure 13.
N OTE : If the operator selects L OG O FF , the Navigator resets to its default screen.