GAI-Tronics ICP9000 Navigator Series Console Operator's Manual - Manual (Page 7)

ICP9000 Navigator Series Console Operator’s Manual Foreword
7 12/10
Scope of Manual
This manual is intended for use by the operator of any of the models of the ICP9000 Navigator Series
Console. It contains all operating instructions for the equipment described and is current as of the
printing date. For installation and service information, please refer to the ICP9000 Navigator Series
Console User and Installation Manual, Pub. 43004-024.
Certain console functions require initial configuration programming, and therefore, references are made
in the manual to GAI-Tronics’ CARD Suite software application. Consult the system supervisor for
available features and program settings.
The programming for your console must be completed before operation. Please refer to the ICP9000
Navigator Series Installation and Service manual packaged with the master control unit (MCU) and the
CARD Suite’s Online Help for programming information.
How This Manual Is Organized: The Guided Tour provides an overview of the graphical user
interface, GUI, of the ICP9000 Navigator Series console and some general information the operator
should be familiar with before proceeding to the Standard Feature Operation section.
The Standard Feature Operation section describes and instructs the operator on the proper use of the
standard features of the console. The Options section provides user information on DC Control, E&M
Control, Enhanced Phone Interface with Radio Patch, and Supervisory Control. A section on Console
Diagnostics covers user-adjustable settings available to the operator.
Ordering Replacement Parts
When ordering replacement parts or requesting equipment information, please include the complete
identification number. This applies to all components, kits, and chassis. If the component part number is
not known, the order should include the number of the chassis or kit of which it is a part and sufficient
description of the desired component to identify it. Order parts from:
Customer Service
GAI-Tronics
400 E. Wyomissing Ave.
Mohnton, PA 19540
US: 800-492-1212
Outside US: 610-777-1374
Service and Repair
Inoperative or malfunctioning equipment should be returned to the factory for repair. Please call
1-800-492-1212 to obtain a Return Authorization number, published repair prices, and shipping
instructions. A Return Authorization number can also be obtained by visiting our website at
www.gai-tronics.com.
N
OTE : A purchase order or credit card number is required prior to processing non-warranty repairs.