GAI-Tronics ICP9000 Navigator Series Console Operator's Manual - Manual (Page 62)

Options ICP9000 Navigator Series Console Operator’s Manual
12/10 62
Selecting a unit ID for transmission is accomplished in one of the three ways discussed previously in the
Call Alert section. However, since this call type must be used with care, group and wildcard ID’s are not
permitted.
After selecting a unit ID and pressing the TRANSMIT button , Radio Enable and Radio Disable behave in
the same fashion as Call Alert. However, the acknowledgement for a Radio Enable and Radio Disable
differ from other call types. Instead of simply seeing that the call was acknowledged in the information
window, the addressed radio will respond with an inbound Radio Enable or Radio Disable message. This
inbound acknowledgement will be stacked in the queue as any other call as “RAD ENABL” or “RAD
DSABL” and a printer log of the incoming message will be made.
MOTOROLA PL-A TRANSMIT
*RADIO ENABLE* UNIT _ _ _ _
1/2 UNIT 0339 0339 CALL ALERT 11:04A
2/2 UNIT 0339 0339 CALL ALERT 11:04A
<0-9/*/#> TO ENTER ID
<SCROLL UP/DOWN> TO SELECT ALIAS
Figure 28. Radio Enable Display
MOTOROLA PL-A TRANSMIT
*RADIO DISABLE* UNIT _ _ _ _
1/2 UNIT 0339 0339 CALL ALERT 11:04A
2/2 UNIT 0339 0339 CALL ALERT 11:04A
<0-9/*/#> TO ENTER ID
<SCROLL UP/DOWN> TO SELECT ALIAS
Figure 29. Radio Disable Display