Gasboy Fleet PLUS - Manual (Page 46)

Converting Local Account Card File Creating Rules
Page 4-20 MDE-5079 Gasboy Fleet PLUS Installation and Implementation Guide to Passport Authorization Server (PAS) · December 2013
5 Select the Format tab. Enter the device’s card number, and select the Hardware Type

(see Figure 4-26 ).
The “Assembling Your Card Data” on page 4-5 describes how your card numbers should be
assembled from the data on your existing cards.
Figure 4-26: Formatting Device
Note: The card number depicted above is the same card number used at the beginning of
“Assembling Your Card Data” on page 4-5 in the string field of your import file. Note
how it is comprised using the material at the beginning of this section.