Hypertherm Shape Cutting Control - Manual (Page 17)

MicroEdge
11
THC, Joystick & Speedpots
Optional features for two Sensor THC, one Joystick and two Speedpots are
offered.
Note: Use of some monitors and other devices may require loading of a device
driver for operation. Many standard device drivers are located in the C:\CABS or
C:\CABS\I386 folders.
Machine Interface
The MicroEDGE shape cutting control is an extremely versatile product offering
up to four configurable axes of motion, configurable I/O locations and a
convenient table interface for ease of installation. The control features may also
be expanded through use of optional analog and network interface cards.
The rear panel of the control has several cable connectors to connect the control
to power, I/O and communication ports. These connectors are clearly labeled as
to their function.