Hypertherm Shape Cutting Control - Manual (Page 61)

55
Mariner ™ offers motion control operation of up to
12 axes with 1024 I/O signals with SERCOS
Interface, providing a high degree of flexibility in
operation and table configurations. This control
system supports Multiple Sensor Torch Height
Controls, Tilt/Rotate, Dual Tilt/Rotate and Dual
Transverse motion axes along with direct
communication to Hypertherm’s HD3070
HyDefinition Autogas Console, HD4070
HyDefinition and HPR Plasma systems. A unique
Laser process screen directly integrates to
Hypertherm’s FASTLaser head. This product
uses type “V” software.
Touch Screen
The 15” display used in the Mariner control is a
patented IntelliTouch Surface Wave technology
which provides precise drift free touch accuracy
and unsurpassed clarity. Pure glass construction
with tiny transducers on the back of the touch
screen preserves color purity and works even if
scratched. There is no known wear out
mechanism as there are no layers, coatings or
moving parts. IntelliTouch technology has been
tested by the supplier for more than 50 million
touches in one location without failure.
THC, Joystick and Speedpots
Features for Sensor THC, Joystick and Speedpots
are provided as standard. Connection and
operation information is provided in the Operators
and Installation Guide provided with this product.
Note: Use of some devices such as USB memory
devices may require loading of a device driver for
operation. Many standard device drivers are
located in the C:\CABS or D:\CABS\I386 folders.
Mariner™
Mariner
Overview
Operation and maintenance of automated equipment involves potential hazards.
Personnel should take precautions to avoid injury. This equipment should only be
opened by trained service personnel.