Hypertherm Shape Cutting Control - Manual (Page 19)

MicroEdge
13
I/O Mating Connector
Connector AMP #208470-1
Backshell AMP #208945-8
Sockets (16-18 ga) AMP #66101-3
Sockets (20-24 ga) AMP #66105-3
I/O Interface
Connecting single ended I/O to the control. These examples assume a +24V
power supply has been connected across pins 34 and 36 of the control, or that
the optional internal +24V power supply has been installed.
Output tied to external Cut On Input tied to Cut Sense Relay