Hypertherm Shape Cutting Control - Manual (Page 51)

Voyager III
45
Setups
Drive Type
The manufacturer of the SERCOS style drive being used would be selected.
This allows proper operation and tuning parameters to be available. SMCC is
the default setting for Voyager III.
Update Rate
The update rate for the ring may be selected for motion and I/O. One millisecond
is the default setting for Voyager III.
Baud Rate
Communication rate for the ring may be selected. 16 Mbaud is the default
setting for Voyager III.
Light Level
The user has the ability to adjust the intensity of the light pulses used on the fiber
optic ring. This feature is used to compensate for diminished signal due to
issues such as ring distance. Low is the default setting for Voyager III