Hypertherm MAX200 Service Manual User Manual
Page 188
Advertising
b-4
MAX200
Service Manual
15
APPENDIX B – ELECTROMAGNETIC COMPABILITY (EMC)
Line Disconnect Switch
Connecting the power cable to the line disconnect switch must conform to national or local electrical codes. This
work should be performed only by qualified, licensed personnel. See
Power Requirements and Line Disconnect
Switch on page 3-6 in IM-87 and page 3-8 in IM-98.
Figure a-3 Power Cable Connections to TB1
WARNING
As a common safety practice, ALWAYS verify that the line disconnect switch is in the OFF
position before installing, disconnecting or servicing in this area.
Advertising