Ivoclar Vivadent IPS e.max CAD Abutment Solutions - Manual (Page 33)

33
Optional
Shape adjustments with IPS e.max CAD Crystall./Add-On
For minor shape adjustments (e.g. proximal contact points), IPS e.max CAD Crystall./Add-On is available. The adjustments
may be made with both the Combination firing or a separate Corrective firing.
Processing
– Mix IPS e.max CAD Crystall/Add-On with IPS e.max CAD Crystall/Add-On Liquid to an easy-to-contour consistency.
– Ensure even mixing of the add-on material and the liquid in order to achieve an optimum firing result.
– Apply the mixed add-on material directly on the unfired Glaze Paste and/or Shades and Stains in the areas to be adjusted
and fire.
– Conduct the Combination firing if Add-On is applied on the "blue" partially crystallized restoration.
– Conduct the Corrective firing if Add-On is applied on an already crystallized restoration.
Mixing IPS e.max CAD Crystall/Add-On with IPS e.max
CAD Crystall/Add-On Liquid to an easy-to-contour
consistency
Application of the mixed Add-On on the blue restoration
before crystallization or on the crystallized restoration
Completing the IPS e.max CAD Ceramic Structure
– Staining T
echnique on the Blue Restoration
Firing parameters see page 64
next working step … Permanent cementation Ti base / ceramic structure page 46