Ivoclar Vivadent IPS e.max CAD Abutment Solutions User Manual
Page 58
Advertising
58
The hybrid abutment crown is inserted into the implant intraorally.
The implant screw is tightened with a torque wrench (the instructions of the manufac-
turer must be observed).
Polymerization with an LED curing light (e.g. Bluephase)
High-gloss polishing is performed using silicone polishers (e.g. Astropol P, Astropol HP
or Astrobrush).
Completed IPS e.max CAD hybrid abutment crown
The matching implant screw is screwed in manually.
The screw channel is sealed with a composite material (e.g. Tetric EvoCeram) in the
appropriate shade.
After polymerization, the occlusion/articulation is checked and possible rough spots are
adjusted with suitable finishers or fine diamonds.
Advertising