Ivoclar Vivadent IPS e.max CAD Abutment Solutions - Manual (Page 44)

44
The crown on the IPS e.max Hybrid Abutment can be completed using either the staining technique or the cut-back
technique. To characterize and glaze, either the PS e.max CAD Crystall./ materials or the IPS e.max Ceram materials are
used.
Basically, the procedure for completing a crown is the same as that for a crown on a prepared tooth. For detailed
information about the procedure, please refer to the IPS e.max CAD Instructions for Use.
Example: IPS e.max CAD crown – Cut-back technique – IPS e.max Ceram
CAD Abutment Solutions
Crown on IPS e.max CAD hybrid abutment
The wash firing is conducted using e.g. IPS e.max Ceram Glaze, Shades and Essences.
Partially reduced IPS e.max CAD restorations fitted on the model. Always observe minimum thicknesses!
For crystallization, the partially reduced IPS e.max CAD restorations are placed directly on the IPS e.max CAD Crystallization Tray using IPS Object Fix Putty or Flow.