Ivoclar Vivadent IPS e.max CAD Abutment Solutions User Manual
Page 55
Advertising
55
Seating and After
car
e
The implant screw is tightened with a torque wrench (the instructions of the
manufacturer must be observed).
The screw channel is sealed, for instance with a cotton or foam pellet
and a temporary composite material.
The luting material, e.g. SpeedCEM, is applied into the conditioned crown.
Pre-polymerization using the four-quarter technique
The restoration margin is covered with glycerine gel (e.g. Liquid Strip).
The crown is placed on the hybrid abutment and secured in place.
Excess luting material is removed.
The luting material is cured with an LED curing light (e.g. Bluephase).
Advertising