Ivoclar Vivadent IPS e.max CAD Abutment Solutions - Manual (Page 41)

41
Completing the IPS e.max CAD Ceramic Structure
– Staining T
echnique on the T
ooth-Colour
ed Restoration
IPS e.max CAD Crystall./Shades, Stains, Glaze and IPS e.max Ceram Shades, Essence, Glaze must not be
mixed with each other!
– Remove restoration from the furnace after completion of the firing cycle (wait for the acoustic signal of the furnace).
– Allow the objects to cool to room temperature in a place protected from draft.
– Do not touch the hot objects with metal tongs.
Additional Characterization firings can be conducted with the same firing parameters.
Glaze firing
Glaze firing is conducted with powder or paste glaze. On abutments, only the emergence profile is glazed. On hybrid
abutment crowns, glaze is applied to the entire outer surface.
Required materials
– IPS e.max Ceram Glaze Paste, Glaze Powder are glazing materials in paste and powder
forms.
– IPS e.max Ceram Glaze and Stain Liquid (allround, longlife) to mix the materials in
powder form (Essences, Glaze), as well as to thin paste materials (Shades, Glaze)
IPS e.max Ceram Shade Incisal is applied to imitate the incisal area.
Individual characterization of the emergence profile with IPS e.max Ceram Essences
Enhancing the chroma of the buccal surface
The Stain and Characterization firing is conducted on a honey-comb firing tray.