Kanguru U2D - Manual (Page 15)

13
3.2 Defining Copy and/or Compare Functionality
Before performing a duplication, take a moment to define the SET COPY and SET COMPARE options
under the SETUP menu. These options will tell the duplicator how the FULL, SMART, BRIEF and
RESIZE modes will function.
3.2.1 Set Copy Functionality
When enabled FULL, SMART, BRIEF and RESIZE modes will execute a Copy process. The SET
COPY option is enabled by default.
To change the SET COPY option:
1. From the Main menu, hold the ‘SET’ button to enter the SETUP menu.
2. Tap the ‘SET’ button to navigate to the SET COPY option. It is marked with an asterisk by default,
signifying that copy functionality is currently enabled.
3. Tap the ‘RUN’ button to toggle whether copy functionality is enabled or disabled.
SETUP
> [ ] SET COPY
٭
3.2.2 Set Compare Functionality
When enabled FULL, SMART, BRIEF and RESIZE modes will execute a Compare process, comparing
the data between the Source and Target drives and confirming that they are identical. The SET COMPARE
option is disabled by default.
To change the SET COMPARE option:
1. From the Main menu, hold the ‘SET’ button to enter the SETUP menu.
2. Tap the ‘SET’ button to navigate to the SET COMPARE option. It should not be marked by default,
signifying that compare functionality is currently disabled.
3. Tap the ‘RUN’ button to toggle whether the option is enabled or disabled.
SETUP
> [ ] SET COMPARE
٭
3.2.3 Set Copy & Compare functionality
Both the SET COPY and SET COMPARE options can be enabled at the same time. When both options
are enabled FULL, SMART, BRIEF and RESIZE modes will execute a Copy & Compare process,
copying the data from the Source to the Target drives and then comparing the data on all drives to ensure
that they are identical.
Defining Copy and/or Compare Functionality