Kanguru U2D - Manual (Page 28)

26
4.3 Select Source
The SELECT SOURCE option allows you to choose which USB port is designated as the Source
location. You can configure any port on the top-most row to be the Source location, or you can configure
the internal hard drive as the Source location. Tap the ‘RUN’ button to change the Source location.
• [ H ] – The internal hard drive is the Source location (default).
• [ 1 ] – The USB port furthest to the top-left is the Source location.
• [ 2 - 11 ] – You can select any of the USB ports on the top row to be the Source location. The USB
ports are numbered as follows:
Note: On the 21 target and 43 target USB Duplicator models, the USB port #11 is designated as the
internal hard drive location.
Select Source
↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑
#1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑
#1 #2 #3 #4 #5 #6 #7 #8 #9 #10 H
↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑
#1 #2 #3 #4 #5 #6 #7 #8 #9 #10 H