Kanguru U2D User Manual
Page 22

20
4. Tap the ‘RUN’ button to execute.
WARNING! Do not remove any drives while they are in use. You can tell if a drive is in use if the green
LED next to it is blinking. Wait for a solid green or red LED before removing a drive. If you want to
interrupt the current process, tap the ‘RUN’ or ‘SET’ button.
5. Once the copy process is completed, Target drives that completed successfully will have a green
LED displayed next to it, indicating that there were no errors on that drive. Target drives that failed
the duplication process will display a red LED next to it.
Note: The duplicator will keep a running count of passed and failed drives until you change copy
modes.
6. Remove all the Target drives and you will return to the Main menu.
Duplicating Using a Storage Center as the Source