Lynx Studio AES16 - Manual (Page 15)

1BInstallation Procedures
11. Next, you’ll be asked to insert the manufacturer’s installation disk into the drive selected (the default is A:\)
– type “C:\Lynx” in the text box, and click “OK”.
12. You will be prompted to select the device driver you are installing. “Lynx AES16” will be your only
choice. Select it and click “Next>”. (NOTE: In Windows 2000, choose AES16 from the list, then click
“Next>”. Click “Next>” on the subsequent confirmation window as well).
13. You may receive a warning that the driver has not been digitally signed by Microsoft. It is perfectly safe to
disregard this warning and click “Continue Anyway” to proceed with the installation. (NOTE: In Windows
2000 click “Yes” to continue installation.)
14. The driver installation will continue. After several moments, the Hardware Update Wizard will indicate
that it has completed the installation. Click “Finish”. (NOTE: In Windows 2000 you will be prompted to
restart the computer. There is one remaining step, so choose “No.”)
AES16 User Manual 15