Lynx Studio AES16 - Manual (Page 45)

Lynx Mixer Reference
6.2 Adapter Window
q
Sample Clock Section
This section of the mixer provides control of the system sample clock generator. All AES16 audio devices on a
single card MUST have identical sample rates since there is one on-board generator. Sample rates cannot be
changed while AES16 is playing or recording.
Source
This control selects the clock source that drives the sample clock generator
from the following options:
Internal
Clock derived from the on-board crystal oscillator
External Clock signal from BNC CLOCK connector
Header Clock signal from the CLOCK IN header
LStream Clock signal from the LStream port
Digital In 1 Clock signal from the Digital 1 Input
Digital In 2 Clock signal from the Digital 2 Input
Digital In 3 Clock signal from the Digital 3 Input
Digital In 4 Clock signal from the Digital 4 Input
Reference
Provides selection of the clock source reference type. This control must be set match the type of clock source
selected as the sample clock source. The available choices are:
Auto
Automatic selection; valid for Internal, Digital, and Video clock sources
13.5 MHz 13.5 MHz video dot clock; valid for External and Header clock sources
27 MHz 27 MHz video dot clock; valid for External and Header clock sources
Word Word clock; valid for External, Header, and LStream clock sources
Word256 256 times word clock; valid for External and Header clock sources
AES16 User Manual 45