5 emc certifications, 1 fcc declaration of conformity, 2 ec declaration of conformity – Lynx Studio AES16 User Manual
Page 79: Emc certifications, Fcc declaration of conformity, Ec declaration of conformity
11BAppendices
12.5 EMC Certifications
12.5.1 FCC DECLARATION OF CONFORMITY
TRADE NAME:
Computer Audio Card
MODEL NUMBER:
AES16
COMPLIANCE TEST REPORT NUMBER:
Covered by European Standards Report #B30915V1
COMPLIANCE TEST REPORT DATE:
November 2, 2003
RESPONSIBLE PARTY (IN USA):
Lynx Studio Technology, Inc.
ADDRESS:
711 West 17
th
Street, Suite H3, Costa Mesa, CA 92627
TELEPHONE: (949)
515-8265
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If the unit does cause harmful interference to radio or television reception, please refer to your user’s manual for instructions on correcting the
problem.
I the undersigned, hereby declare that the equipment specified above conforms to the above requirements.
Costa Mesa, California
January 1, 2004
Robert Bauman
Compliance Engineer
12.5.2 EC DECLARATION OF CONFORMITY
MANUFACTURERS NAME:
Lynx Studio Technology, Inc.
MANUFACTURER ADDRESS:
711 West 17
th
Street, Suite H3
Costa Mesa, CA 92627, U.S.A.
COMPLIANCE TEST REPORT NUMBER:
B30915V1
COMPLIANCE TEST REPORT DATE:
November 2, 2003
TYPE OF EQUIPMENT:
Information Technology Equipment
EQUIPMENT CLASS:
Residential, Commercial and Light Industry
MODEL NUMBER:
AES16
CONFORMS TO THESE STANDARDS:
EN50022: 1998, EN55024:1998 + A1:2001, CISPR 16:1993
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
YEAR OF MANUFACTURE:
2003
I the undersigned, hereby declare that the equipment specified above conforms to the above directives and standards.
Newport Beach, California
January 1, 2004
Robert Bauman
Compliance Engineer
AES16 User Manual
79