Connecting other equipment, Remote control jacks connection, Rs-232c – Marantz NA-11S1 User Manual

Page 12: Flasher in

Advertising
background image

9

Connecting other equipment

Remote control jacks connection

If this unit is connected to a Marantz amp, the amp can be controlled via this unit using the

Marantz Remote App or web control function (

vpage  39

). Also, remote control signals

received by the amp can be used to control this unit.

n Connection

Use the supplied remote connection cable

to connect the REMOTE CONTROL IN

terminal of this unit to REMOTE CONTROL

OUT terminal of the amplifier.

n

Setting

Set the remote control switch on the rear

panel of this unit to “EXT.” to use this

feature.

• This setting will disable remote sensor

reception of this unit.

• To operate the unit, point the remote

control at the remote sensor of the

amplifier.

To use this unit without connecting it to the

amplifier, set the remote control switch to

“INT.”.

Amplifier

Set to “EXT.”

The unit

RS-232C

Connect an external control device or other

device for servicing. (Use a straight cable for

the connection.)

External control device

FLASHER IN

This unit can be controlled by connecting a

control box or other control device to this unit.

Control box or control device

GND

Signal

Monaural mini-plug cable

To use the FLASHER IN jack, set the remote

control switch to “INT.”.

Preparation

Operation

Information

Preparation

Advertising
This manual is related to the following products: