Marantz NA-11S1 - Manual (Page 37)

34
USB memory device playback
You can playback music stored on a USB memory device
using this unit.
n USB memory device ( vpage 47 )
Playing files stored on USB memory
devices
1
Connect the USB memory device to the USB port.
USB
memory
device
2
Press X (on/standby) to turn on
power to the main unit.
3
Press USB to switch the input
source to “USB”.
• For details on selecting the input
source using the unit buttons, see
“Selecting the input source using the
main unit” ( vpage 21 ).
4
Press ui to select the file or
folder, then press ENTER or p .
5
Press ui to select the file, then
press ENTER , p or 1 / 3.
Playback starts.
• If the USB memory device is divided into multiple partitions,
only the top partition can be selected.
• This unit is compatible with MP3 files conforming to “MPEG-
1 Audio Layer-3” standards.
• Marantz does not guarantee that all USB memory devices
will operate or receive power. When using a portable USB
connection type HDD of the kind to which an AC adapter can
be connected to supply power, use the AC adapter.
NOTE
• USB memory devices will not work via a USB hub.
• It is not possible to connect and use a computer via the USB
port of this unit using a USB cable.
• Do not use an extension cable when connecting a USB
memory device. This may cause radio interference with
other devices.
• Files can be read from a USB memory device by connecting
the device to this unit. The file reading time varies according
to the amount of data saved on the USB memory device.
Several minutes may be required to read the maximum
permissible number of files and folders.
• Note that Marantz will accept no responsibility whatsoever
for any problems arising with the data on a USB memory
device when using this unit in conjunction with the USB
memory device.
Removing the USB memory device
1
Press X (on/standby) to set the
standby mode.
2
Check that the communication
indicator on the USB memory
device is not flashing, then pull
out the USB memory device.
NOTE
Do not remove the USB memory device from the unit when
the USB memory communication indicator is flashing. Doing
so may damage the USB memory device, or may corrupt the
files recorded on the USB memory device.
Playing repeatedly (Repeat playback)
Press REPEAT .
Repeat playback starts.
• Each time you press
REPEAT , the
repeat mode is toggled as shown
below.
Single-track repeat All-track repeat
Repeat off
(indicator turns off)
(Single-track repeat) Only 1 track plays repeatedly.
(All-track repeat) All tracks within the current
playback folder are repeated.
Repeat off
(indicator turns off) Normal playback resumes.
Playing random order (Random playback)
Press RANDOM .
The indicator on the display is lighted
and all tracks in the current playback
folder are randomly played back.
n Canceling random playback
Press RANDOM .
The indicator on the display turns off.
Preparation
Operation
Information
Operation