Table 6: base station indication – NavCom RT-3020 Rev.F User Manual
Page 40
Advertising
RT-3020 User Guide – Rev. F
Table 5: Link LED Indication (Default Rover Mode)
LINK Status
Command Mode
Repeating Red to Amber to Green indicates
Searching for base radio signal
C/No - Strong Signal Strength from base
radio
C/No - Medium Signal from base radio
C/No - Weak Signal Strength from base
radio
Base
LEDs
Table 6: Base Station Indication
BASE Status
The following BASE LEDs reflect the type of RTK
corrections when the RT-3020 is operated as a
Base Station
RTK/UltraRTK™ - NCT Proprietary
(1Hz blink rate)
CMR (1Hz blink rate)
RTCM 18, 19 (1Hz blink rate)
20, 21 (5Hz blink rate)
2-38
Advertising