NavCom RT-3020 Rev.F - Manual (Page 47)

RT-3020 User Guide – Rev. F
Block Diagram
The RT-3020 has three user configurable physical
communications ports (two external and one internal)
and several logical communications ports. To aid in
distinguishing these ports, please refer to the block
diagram below.
Figure 11: RT-3020S/M Block Diagram
‡
These user configurable physical ports are
Com1, Com2, and Radio/Diagnostic. The
Com ports are described in the next section.
‡
Use StarUtil to configure the internal radio
port as the output port for RTK corrections.
Select Port Radio from the NCT RTK drop-
down list (see Figure 12). This is the setting
also for NCT UltraRTK™. The corrections can
be simultaneously sent to any of the logical
ports, and also the internal MMC Memory
Module for logging. Described in the StarUtil
User Guide (see Related Documents in the
fore-matter).
3-45