Factory default settings, Figure 16: starutil nmea message list – NavCom RT-3020 Rev.F User Manual
Page 56
Advertising
RT-3020 User Guide – Rev. F
Factory Default Settings
COM1
9 Configuration - Data port
9 Rate – 19.2Kbps
9 Output of NMEA messages GGA & VTG
scheduled @ 1Hz rate
Though the output rate defaults to
1Hz, the data output rate can be
changed to On Change. Making this
selection in the NMEA output list will
better reflect the navigation rate
selected in the Rover Setup screen.
Figure 16: StarUtil NMEA Message List
4-54
Advertising