NavCom StarControl Rev.C - Manual (Page 32)

StarControl User Guide Rev. C
5 - 30
‡
The View\Status\Diagnostic tab shows a green check for the active
navigation mode. If all Nav Modes are checked on the GPS tab, only the
Nav Mode currently in use will have a green check mark.
The GPS tab sets the controls for navigation position update rate, and measurement
usage limitations. The available choices for Navigation Rate and Parameters are
detailed in Table 3.
Table 3: GPS Tab Navigation Options
Property Possible Values
Navigation Rate 1, 2, 5, 10, 25 Hz
Navigation Elev Mask 0 - 89 degrees
Maximum PDOP 5, 10, 15, 20, 25.5
Min SVs for Solution 3 – 10 (inclusive)
Solution
2D = Constrain Height
3D = Compute Height
Height
Manual = No auto transition,
use constrained Height
Auto = Compute Height
Continued on next page