NavCom StarControl Rev.C - Manual (Page 46)

StarControl User Guide Rev. C
7 - 44
The following example is an NCT RTK Base using the internal radio with the navigation
and data parameters set:
Table 10: Base Example Profile Settings
Profile Tab Function Options
Nav Rate 1Hz
Nav Elev Mask 7 degrees
Max PDOP 10
Min SVS for Nav Output 4
Solution 3D
GPS NCT RTK
Height Auto
ALM Disable
GGA Disable s
GLL Disable s
GSA Disable s
GST Disable s
GSV Disabled
RMC Disabled
VTG Disable s
ZDA Disable s
SET Disable s
NMEA NMEA Output
GBS Disable s
Auto
Preferred PRN 120
SBAS SBAS MODE
Alternate PRN 121
Correction Format NavCom
Ref STN ID 3
Correction Rate 1 s
RTK (Base) Mode Base
Base Position Rate 10 s
Correction Port Internal
Radio
Mode Master
Power Level 1000 mW
Radio Internal Radio
Network ID 10
Use Antenna Bias
Phase Center Sign -
Phase Center 85 mm
Antenna Radius 100 mm
Antenna Bias
Slant Height 90 mm
‡
Unlike the procedure for setting up a Rover, setting the Base
configuration will require accessing several different StarControl screens
other than Profile.