NavCom StarControl Rev.C - Manual (Page 39)

StarControl User Guide Rev. C
6 - 37
Chapter 6......................................................................................Tools
There are 5 sub-items under Tools of the StarControl menu bar.
9 Data Logging Setup
9 QuickStart Starfire
9 Base Position Input
9 Upload Profiles
9 External Device Configuration
Figure 33: Tools Option Tab
Data Logging
Figure 34: Data Logging Tool
Start Logging
The Start Logging button is enabled when the unit is not logging, and disabled when the
unit is logging data. GPS data is logged internally to the on-board 64 MB memory
module. When the logging tool starts up, the controller poles the GPS unit to obtain the