Niveo Professional NWAR33P - Manual (Page 104)

104
MAC Spoofing: This option is required by some service Providers. You must fill the MAC
address specified by your service provider when this information is required. The default setting
is set to disable.
IP Address: Enter your fixed IP address.
Netmask: User can change it to others such as 255.255.255.128. Type the netmask assigned
to you by your ISP (if given)
Gateway: Enter the IP address of the default gateway.
Obtain DNS: Select this check box to activate DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the netmask.
VLAN Mux: check whether to enable VLAN Mux function.
802.1Q VLAN ID: It is a parameter to specify the VLAN which the frame belongs. Enter the
VLAN ID identification, tagged: 2-4095.
IPv6: Check to enble the function.
IP/Prefix Length: Enter IP Address and Prefix Length.
IPv6 Gateway: Enter the IP address of the default IPv6 gateway.
Obtain IPv6 DNS: Click to activate DNS and to enable the system to automatically detect DNS.
Primary DNS / Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the netmask.
Click Apply to confirm the settings.
Pure Bridge (EWAN)
VLAN Mux: check whether to enable VLAN Mux function.
802.1Q VLAN ID: It is a parameter to specify the VLAN which the frame belongs. Enter the
VLAN ID identification, tagged: 2-4095.
Click Apply to confirm the settings.