Niveo Professional NWAR33P - Manual (Page 35)

35
Chapter 4: Configuration
To easily configure this device for internet access, you must have IE 5.0 / Netscape 4.5 or
above installed on your computer. There are basically 2 ways to configure your router before
you are able to connect to the internet:
Easy Sign-On & Web Interface . Configuration of each
method will be discussed in detail in the following sections.
Easy Sign-On (EZSO)
This special feature makes it easier for you to configure your router so that you can connect to
the internet in a matter of seconds without having to logon to the router GUI for any detail
configuration. This configuration method is usually auto initiated if user is to connect to the
internet via Billion's router for the first time.
After setting up the router with all the appropriate cables plugged-in, open up your IE browser,
the EZSO WEB GUI will automatically pop up and request that you enter some basic
information that you have obtained from your ISP. By following the instructions given carefully
and through the information you provide, the router will be configured in no time and you will find
yourself surfing the internet sooner than you realize.
Follow the Easy Sign-On configuration wizard to complete the basic network configuration.
Connect your router with all the appropriate cables. Then, load your IE / netscape browser.
When the EZSO configuration wizard pops up, select the connect mode which you want to set
up and then click continue.