Niveo Professional NWAR33P - Manual (Page 59)

59
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific
headers) that IP will attempt to send through the interface.
VLAN Mux: check whether to enable VLAN Mux function.
802.1Q VLAN ID: It is a parameter to specify the VLAN which the frame belongs. Enter the
VLAN ID identification, tagged: 2-4095.
IPv6: Check to enable the function.
IPv6 Address: Enter the IP address of the default gateway. Default is "::", which obtains IPv6
address automatically.
Obtain IPv6 DNS: Click to activate DNS and to enable the system to automatically detect DNS.
Primary DNS / Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the netmask.
Click Apply to confirm the settings.
Obtain IP Address Automatically (EWAN)
Select this protocol enables the device to automatically retrieve IP address.
VLAN Mux: check whether to enable VLAN Mux function.
802.1Q VLAN ID: It is a parameter to specify the VLAN which the frame belongs. Enter the
VLAN ID identification, tagged: 2-4095.
IPv6: Check to enable the function.
IPv6 Gateway: Enter the IP address of the default IPv6 gateway.
Click Apply to confirm the change.