Niveo Professional NWAR33P - Manual (Page 61)

61
Pure Bridge (EWAN)
VLAN Mux: check whether to enable VLAN Mux function.
802.1Q VLAN ID: It is a parameter to specify the VLAN which the frame belongs. Enter the
VLAN ID identification, tagged: 2-4095.
Click Apply to confirm the settings.
WLAN
WPA / WPA2
Wireless Parameters
WLAN Service: Default setting is set to Enable. If you do not have any wireless, select Disable.
ESSID: The ESSID is the unique name of a wireless access point (AP) used to distinguish one
from another. For security propose, change to a unique ID name which is already built into the
router wireless interface. It is case sensitive and must not exceed 32 characters. Make sure
your wireless clients have exactly the ESSID as the device in order to connect to your network.
Hide ESSID: This function enables the router to become invisible on the network. Thus, any